Left oil seal
1. Loosen the front wheel nuts, raise the front of the car and install vertical supports. Remove the front wheel and the mudguard located on the underside of the car.
2. Remove the left drive shaft (see subsection 12).
3. Drain the oil from the front differential (see chapter 1).
4. Using a special tool or an impact puller with an adapter, remove the oil seal.
5. Using a special mandrel or a socket with a diameter slightly smaller than the oil seal diameter, insert a new oil seal. Lubricate the edges of the new oil seal with multi-purpose grease.
6. Install the drive shaft.
7. Fill the differential with the appropriate oil (see chapter 1).
8. Install the axle shaft (see subsection 12).
9. Install the splash guard.
10. Install the wheel, lower the vehicle and make sure the drive shaft is operating normally.
Right oil seal
11. Remove the differential (see subsection 18).
12. Drain the oil from the front differential (see chapter 1).
13. Using a special tool or an impact puller with an adapter, remove the oil seal.
14. Using a special mandrel or a socket with a diameter slightly smaller than the oil seal diameter, insert a new oil seal. Lubricate the edges of the new oil seal with multi-purpose grease.
15. Install differential (see subsection 18).