2. Remove, if necessary, the battery from the vehicle (see chapter 5).
3.1L engine
3. Remove the air filter element (see chapter 1).
4. Disconnect the air intake clamp from the air cleaner (see illustration).
8.4. 3.1L Engine Air Filter Details: A - clamp, B - MAP sensor connector, C - vacuum line, D - crankcase vent pipe, E - vacuum connector
5. Disconnect the electrical connector from the pressure sensor (IDA), remove all vacuum lines from the body and disconnect all other clips holding the air intake.
6. Disconnect the crankcase ventilation tube.
7. Disconnect the hot air intake and remove the air filter housing from the vehicle.
8. To install the air filter, reverse the steps.
3.8L engine
9. Turn away bolts (see illustration), holding the air intake in the front of the engine compartment.
8.9. Turn away bolts (indicated by arrows), holding the air intake in the engine compartment
10. Turn away a bolt, disconnect a collar from the engine (see illustration) and an air intake in the engine compartment.
8.10. Unscrew the bracket holding the air intake clamp
11. Loosen the clamp connecting the throttle body to the air intake (see illustration).
8.11. Loosen the lock (A), disconnect the air temperature sensor AIT (IN) and remove the air filter housing from the engine compartment
12. Disconnect the air temperature sensor (AIT) (see illustration) and remove the air filter housing from the engine compartment.
13. Installation of the air filter is made upside-down.