General characteristics of the engine
Cylinder numbering (from drive belt to gearbox):
- front row (from the side of the radiator) — 1-3-5
- Back row - 2-4-6
The ignition order in the cylinders is 1-6-5-4-3-2
Arrangement of cylinders and direction of rotation of the distributor
Valve lifters
Diameter - 0.8420-0.8427 inches
The gap between the pusher and the hole - 0.0008-0.0025 inches
Oil pump
External clearance between gear and housing - 0.008-0.015 in
Internal clearance between gear and housing - 0.008-0.015 in
Torques ft.lbs
(unless other units are specified)
Camshaft sprocket mounting bolts:
- First stage - 74
- The second stage - at 105°
Cylinder head bolts:
- First stage - 35
- Second stage - 130°
- Third stage - Four central bolts - 30°
Bolts of fastening of a final collector to a head of cylinders — 38
Intake Manifold to Cylinder Head Bolts and Nuts - 88 in-lbs
Oil Sump Bolts - 124 in-lbs
Bolts of fastening of a flange of the oil filter to a cover of a chain of a camshaft — 22
Oil pump:
- Pump Cover to Timing Chain Cover Bolts - 97 in-lbs
- Receiver tube and shield assembly bolts - 132 in-lbs
Valve Cover Nuts and Bolts - 88 in-lbs
Rack valve rocker - 28
Bolts of fastening of a cover of a chain of a drive of a gas-distributing shaft — 22
Antivibrator center bolt:
- First stage - 110
- The second stage - at 76°