2. Unscrew the screw securing the switch located on the dashboard casing from below (see illustration).
10.2. Using a Phillips screwdriver, unscrew the headlight switch mounting screw located on the bottom of the switch housing
3. Using a small screwdriver, carefully pry up the upper outer corner of the switch, disengage the retaining clips and twist the switch out of the front panel.
4. Remove the switch from the hole and use a small screwdriver to disconnect the electrical connector from it (see illustration).
10.4. Using a small screwdriver as a lever, disconnect the electrical connector from the headlight switch
5. Connect the electrical connector to the switch, insert the tabs and, having installed the switch with a turn into the socket, press it until the clips snap into place. Tighten the switch fixing screw.