2. Using a small screwdriver, disconnect the washer hose from the wiper arm (see illustration).
19.2. Remove the wiper blade, then disconnect the washer hose
3. Press the fixing tab and remove the wiper blade from the motor axis (see illustration).
19.3. Using a screwdriver, press the locking lever, then remove the wiper arm from the axle
4. Loosen and remove the washer and nut of the wiper motor, noting the position of the nut (see illustration).
19.4. Wiper Motor Shaft Nut and Washer
5. Open the rear door and remove the inner door panel (chapter 11, section 11).
6. Disconnect the wiper motor connector through the hole. Disconnect the rear door retaining latch. Turn away bolts, remove the electric motor and take it through the hole (see illustration).
19.6. Remove the motor through the hole in the rear door
7. Installation is carried out in the reverse order.