2. Remove the air filter (see chapter 4, section 8).
3. The front blower motor is located at the rear of the engine compartment. Remove the left wiper arm (see chapter 12, section 18). Disconnect the electrical connector from the blower motor (see illustration).
10.3. Disconnect the wiring connector and unscrew the mounting screws from the rear evaporator and blower assembly: 1 - wiper arm rod, 2 - heater fan motor screws, 3 - electrical connector
4. Turn away bolts of fastening of a supercharger and remove the engine and the fan from the case (see illustration 10.3).
5. Loosen the nut and slide the blower fan off the motor shaft (see illustration).
10.5. Loosen the nut (arrow) off the motor shaft and pull out the fan (nut turns clockwise)
6. Installation is carried out in the reverse order.