Withdrawal
1. Disengage the cable from the latch assembly by disengaging the hood release latch (see illustration).
10.1. Unhook the cable from the lock by disconnecting the latch
2. Attach a piece of thin wire to the end of the cable and remove all cable retainers.
3. Remove the hood release lever from the passenger compartment (see illustration).
10.3. Remove the two bolts securing the hood release lever (indicated by arrows)
4. Pull out the cable and its bushing by pulling it out of the passenger compartment.
Installation
5. Not forgetting to install a bushing on the new cable, connect a piece of twine or wire to it and pull the cable into the engine compartment.
6. Connect the cable and clamp it in the retainer.
7. Make sure that the sleeve is in its original place and install the hood opening lever.