Early gear models 8.25" and reducer 9.25"
1. Raise the car.
2. Disconnect the breather hose from the fitting on the gearbox housing.
3. Turn out the union. Tightening torque 28 Nm.
Note: Before installing, apply sealant to the fitting threads.
4. Install in reverse order.
Late models gearbox 8.25"
1. Raise the car.
2. If installed, remove the gear guard.
3. Disconnect the breather hose (1) from fitting (2) on the gearbox housing.
4. Turn out the union. Tightening torque 20 Nm.
Note: Before installing, apply sealant to the fitting threads.
5. Installation is carried out in the reverse order.