Examination
The integrity of the spark plug wires is vital to the proper operation of the engine. In order to accurately recognize conditions that may affect the operation of the engine, a thorough check must be carried out.
1. Check the routing of the spark plug wires. Incorrect routing may cause crossfire.
2. Look for any signs of cracks or cuts in the wire insulation.
3. Inspect all boots for signs of tearing, puncture, sparks, carbon build-up, or contact corrosion.
If any kind of defect is found, replace the spark plug wires.
Withdrawal
1. Remove wire from spark plug.
- A) Rotate the spark plug wire boot half a turn.
- b) Remove the cable by pulling on the cover.
2. Remove the wire from the ignition coil.
- A) Rotate the spark plug wire boot half a turn.
- b) Pull on the cover and remove the wire.
Installation
3. Installation is carried out in the reverse order. Check the wire connection is secure.