Withdrawal
Early models
1. Remove the engine top cover.
2. Disconnect from the valve a tube of system of catching of steams of fuel.
3. Disconnect the connector (1) valve.
4. Remove the bolt (2) valve fasteners. Tightening torque 10 Nm.
5. Remove valve (3) and seal (1).
6. Installation is carried out in the reverse order.
Later models
1. Remove the air filter outlet duct.
2. Disconnect the EVAP tube from the EVAP accumulator cleaning valve.
3. Disconnect the connector (2) valve.
4. Disengage the retainer securing the fuel vapor accumulator cleaning valve to the fuel manifold.
5. Remove the valve.
Installation
6. Installation is carried out in the reverse order.