Withdrawal
1. Remove the crankshaft pulley.
2. Remove the front oil seal (1) crankshaft from the engine front cover, discard the oil seal.
Installation
Attention: do not lubricate the sealing lip of the stuffing box, re-installation of the stuffing box is not allowed.
1. Lubricate the outside of the NEW oil seal with engine oil.
2. Lubricate the oil seal seat in the front cover with engine oil.
3. Install the gland on the guide.
4. Press the oil seal into the front cover.
5. Install the crankshaft pulley.
Installing the gland on the guide