Withdrawal
1. Remove the top fan diffuser.
2. Install the holder on the fan clutch.
3. Loosen the nut securing the fan hub to the water pump by turning it counterclockwise. Tightening torque 56 Nm.
4. From the back of the clutch, remove the bolts securing the fan blades to the clutch. Tightening torque 23 Nm.
5. Separate the fan clutch from the fan blades.
Caution: Do not use damaged fan blades or attempt to repair damaged fan blades. Unbalanced blades can fly out and cause vehicle damage or personal injury.
Installation
6. Installation is carried out in the reverse order.