Models without power windows
Turn the handle to raise or lower the glass.
Power window models
1. On models with power windows, the position of the windows is carried out by pressing the appropriate switch. In this case, the ignition key must be set to the position "ON".
1 - power window lock switch "WINDOW LOCK", 2 - driver's door power window switch, 3 - rear right door power window switch, 4 - front passenger's power window switch, 5 - rear left door power window switch.
2. On the panel of each passenger door there is a switch, by pressing and holding which the passenger can adjust the position of the glass only from his side.
Lightly pressing the driver's door power window switch down will lower the window as long as the switch is held down. To raise the glass, slightly pull the switch up and hold it in this position until the glass is fully raised.
3. Front door windows are equipped with an additional function - full automatic lowering of the glass, in which there is no need to hold the switch in the pressed position.
To lower the window, press the switch to the end of its travel. If it is necessary to stop the window in the ajar position, briefly press the switch up and lower it again.
4. There is a power window lock switch on the power window control panel "WINDOW LOCK". When it is pressed, it is not possible to lower the windows, except for the driver's door glass.
