Tire change

1. When replacing tires, use only tires of the same size and design as originally installed, and with the same or greater load capacity. The use of any other size or type of tire can seriously affect handling, comfort, speedometer/odometer accuracy, ground clearance, body to tire or chain clearance.

Attention: do not mix radial and diagonal tires. This can cause dangerous vehicle behavior leading to loss of control.

2. It is recommended to change all four tires or at least both front or rear tires at the same time.

3. After repairing a tire, the wheel must be balanced.

4. Every 5000 km, swap the tires according to the scheme shown in the figure. Pay attention to the tread pattern. Tires with a directional tread pattern have an arrow on the side in the direction of rotation and may also have the inscription "rotation".

When using rubber with a directional tread pattern

When using rubber with a non-directional tread pattern