Escalade
1. Open the back door.
2. Loosen the screws (1).
3. Detach the clips (2), by releasing the guides (3).
4. Disconnect the connector (4).
5. Remove the rear combination lamp (5).
6. Install in the reverse order of removal.
Tahoe, Yukon
1. Open the back door.
2. Loosen the screws (1).
3. Detach the clips (2), by releasing the guides (3).
4. Disconnect the connector (4).
5. Remove the rear combination lamp (5).
6. Install in the reverse order of removal.
Avalanche
1. Open tailgate.
2. Loosen the screws (1).
3. Disconnect the connector (2).
4. Remove the rear combination lamp (3).
5. Install in the reverse order of removal.