Type 1
1. Disconnect the connector.
2. Detach the lamp retainer from the bracket.
3. Turn away an adjusting bolt and a spring.
4. Remove the fog lamp from the bracket.
5. If necessary turn away a bolt of fastening of an arm and remove an arm. Tightening torque 25 Nm.
6. Install in the reverse order of removal.
Type 2
1. Remove fender liner.
2. Disconnect the connector.
3. Turn away nuts of fastening (1) fog lamp (2) and take it off. Tightening torque 10 Nm.
4. Install in the reverse order of removal.