Type 1
1. Turn the light control switch to position "OFF".
2. Lower tailgate.
3. Turn away two screws and remove the back combined lantern.
4. Replace the lamp if necessary.
- Upper Lamp (stop lamp)
- central lamp (turn signal lamp)
- bottom lamp (reversing light)
5. Rotate the chuck.
6. Remove the bulb holders from the combination lamp.
7. Install in the reverse order of removal.
Type 2
1. Turn the light control switch to position "OFF".
2. Lower tailgate.
3. Turn away screws and remove the combined lantern.
4. Turn the cartridges and remove them along with the lamps.
5. Install in the reverse order of removal.