2. Remove the top finishing of the panel of devices.
3. Remove a casing of a steering column.
4. Turn away four bolts of fastening of the assembly block.
5. Disconnect the five connectors from the mounting block on the front passenger side.
6. Set the mounting block aside.
7. Loosen the two screws that secure the airflow reversal flap and slide it toward the center.
8. Disconnect the coaxial cable.
9. Establish a spacer between the block of the conditioner and a body.
10. Unscrew the antenna mast (1). Tightening torque 6 Nm.
11. Remove the outer part of the ventilation grill (2).
12. Loosen the screws (3). Tightening torque 5 Nm.
13. Remove the antenna (4).
14. Install in the reverse order of removal.