Type 1
Attention: before carrying out repair work, turn the ignition switch to the position "OFF" or "LOCK" and turn off all electrical loads, except when necessary for repair work. If tools or fixtures during repair work can come into contact with electrical contacts, you should also disconnect the wire from the negative terminal of the battery. Violation of these requirements may result in injury, damage to the vehicle or vehicle systems.
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove the facet of the instrument cluster.
3. Using a small screwdriver, unfasten the CD player.
4. Disconnect the connectors.
5. Remove the CD player.
6. Install in the reverse order of removal.
Type 2
Attention: do not pull on the cover of the CD player when removing the facet of the center console.
1. Loosen the screws securing the facet of the center panel.
2. Using a slotted screwdriver, disconnect the center panel facet clips.
3. Remove the facet of the center panel.
4. Use a small screwdriver to pry out the latches on the CD player.
5. Slide the CD player towards you and remove it.
6. Disconnect the connectors.
7. Install in the reverse order of removal.
Release models since 2003
1. Remove the facet of the instrument cluster.
2. Using a slotted screwdriver, press the latches on the center console.
3. Remove the central console.
4. Disconnect the connectors.
5. Remove the facet of the center console.
6. Remove the CD player.
7. Install in the reverse order of removal.