Withdrawal
1. Raise the vehicle and place the safety stands under the frame.
2. Place a temporary support under the bridge beam.
3. If the suspension is electronically controlled, disconnect the body height sensor connector.
4. Turn away a nut and a bolt of fastening of the lever to a frame (A).
5. Turn away a nut and a bolt of fastening of the lever to a beam of the bridge (IN). Tightening torque 105 Nm.
Attention: the final tightening of the lever fastening bolts is carried out with the car standing on wheels.
6. Remove the upper trailing arm.
Installation
7. Install in reverse order.