Withdrawal
1. Remove the outer tie rod.
2. Loosen the nut (2) inner tie rod mounts (1).
3. Remove clamp (2) boot mounts (1) steering rack.
4. Cut the clamp (1) boot mounts (2) on the steering rack.
5. Remove the boot.
Installation
1. Install a new steering rack clamp on the boot.
2. Before installing the boot on the steering rack, grease the boot seats on the inner link and steering rack with grease.
3. Install boot on inner tie rod.
4. Establish anther on a steering rack on a landing groove in a rail.
Attention: when installing, do not deform or twist the boot, eliminate any distortion of the shape manually.
5. Tighten the boot collar on the steering rack with special pliers.
6. Establish and tighten a collar of fastening of anther on steering draft.
7. Establish a nut of fastening of internal steering draft.
8. Install the outer tie rod.