Internal elements of the car body Chevrolet Tahoe 2 and 3

Dashboard Upper Trim
Withdrawal Cadillac 1. Disable the passive safety system. 2. Remove a decorative molding of a windscreen. 3. Remove the panel with grilles blowing the...

Knee support — removal and installation
Cadillac 1. Remove the parking brake release handle. 2. Remove the left side cover (1) dashboard by pulling it out of the three retaining clips. 3. Remove two...

Knee deflector
Withdrawal 1. Remove the knee brace. 2. Loosen the nuts (1) knee baffle brackets. Tightening torque 9 Nm. 3. Remove the deflector. Installation 4. Installation...

Instrument cluster visor
Withdrawal Except Cadillac 1. Lower the steering wheel to its lowest position. 2. Remove the left deflector of the ventilation system. 3. Remove the top trim...

Instrument cluster trim
Withdrawal Except Cadillac 1. Remove the visor of the instrument cluster. 2. Pull out the trim (1) of four clips (2). Installation 3. Installation is carried...

Dashboard frame
Withdrawal 1. Remove the bottom of the dashboard (Cadillac) or remove the dashboard frame (except Cadillac). 2. Remove 8 bolts (1) frame fixings (2) dashboard....

Dashboard frame support
Withdrawal 1. Remove the bottom of the dashboard (Cadillac) or dashboard frame (except Cadillac). 2. Remove the bottom bolt (1) frame support fasteners....

Dashboard door
Withdrawal 1. Open the dashboard door. 2. Disconnect the door opening stops, lower the door completely. 3. Loosen the screws (1) door fixings. Tightening...

Lower Dashboard
Withdrawal Except Cadillac 1. Remove the front floor console. 2. Remove the top trim of the dashboard (1). 3. Loosen the screws (2) fastening the frame of the...

Panel with grilles for blowing the windshield
Withdrawal 1. Remove the decorative windshield molding. 2. Pull out the panel (1) of seven clips (2). Cadillac Except Cadillac 3. Disconnect wiring connectors....

Center console sides (Cadillac)
Withdrawal The removal of the sidewalls is carried out using a flat screwdriver, installed near the sidewall fastening clips. 1. On the right side: open the...

Facet of the center console
Withdrawal Cadillac 1. Loosen the screws (1) fixing the facet of the heater/air conditioner control panel. Tightening torque 2 Nm. 2. Pull the top edge of the...

Center console housing
Withdrawal Except Cadillac 1. Remove the center console. 2. Remove the center console armrest. 3. Remove the rear trim of the center console. 4. Loosen the...

Center console — removal and installation
Cadillac 1. Remove the two front seats. 2. Remove the right and left lower dashboard trim. 3. Remove the front trim of the center console. A) Using a...

Rear trim center console
Withdrawal 1. Remove the facet of the center console. 2. Remove the rear cup holder from the console. 3. Loosen the four screws (1) rear trim mounts (2) center...

Overhead console — removal and installation
Withdrawal 1. Remove the lens (1) ceiling console light. 2. Loosen the screws (2) console mounts. 3. Disconnect the console wiring connectors. 4. Pull the...

Rear overhead console
Withdrawal 1. Pull out the console (1) from clips (2). Without DVD player, typical example 2. Disconnect the console wiring connector. 3. Replace clips if...