Left
1. Remove headlights.
2. Remove the radiator support braces.
3. Remove the top rear fender bracket. Turn away bolts and remove an arm of fastening of a forward fender. Tightening torque 9 Nm.
Removing the front wing bracket
4. Remove the extra battery tray.
5. Remove the left hood hinge.
6. Remove the left draft of a cowl.
7. Remove the PDU under the hood.
8. Remove the left front wheel arch liner.
9. Turn away bolts (1) And (2) wing mounts. Tightening torque 25 Nm.
10. Remove clips (3) wing fixation.
11. Loosen the nuts (4) wing mounts. Tightening torque 25 Nm.
12. Remove fender (5).
On right
1. Remove headlights.
2. Remove the top rear fender bracket.
Loosen the bolts and remove the front fender mounting bracket (see picture "Removing the front wing bracket"). Tightening torque 9 Nm.
3. Remove the air filter housing.
4. Remove the air filter housing pan.
5. Remove the expansion tank from the wing and secure it to the side.
6. Remove the main battery tray.
7. Remove the right hood hinge.
8. Remove the right draft of a cowl.
9. Remove the right front wheel arch liner.
10. Remove the bolts (1) And (2) wing mounts. Tightening torque 25 Nm.
11. Remove clips (3) wing fixation.
12. Remove fender (4).