Exterior elements of the car body Chevrolet Tahoe 2 and 3

Front bumper trim panel
Withdrawal 1. (Only Escalade) Remove the upper air damper of the radiator. 2. Remove the fenders of the front wheel arches. 3. Remove 4 bolts (1) front fender...

Lower trim front bumper (Z71)
Withdrawal 1. Remove the front bumper trim panel. 2. Pull out the bottom trim (1) from fixators. Installation 3. Installation is carried out in the reverse...

Bumper trim support bracket
Withdrawal 1. Remove the front bumper trim panel. 2. Remove six bolts (1) support bracket fixings (2). Tightening torque 7 Nm. 3. Disconnect from an arm...

Front bumper trim reinforcement
Withdrawal 1. Remove the front half of the front wheel arch liner. 2. Remove four bolts (1) amplifier mounts (2). Tightening torque 7 Nm. 3. Remove the...

Front bumper reinforcement
Withdrawal 1. Remove the front bumper trim panel. 2. Remove the bolts (1) bumper mounts. Tightening torque 160 Nm. 3. Remove the amplifier (2). Installation 4....

Front bumper reinforcement support
Withdrawal 1. Remove the front bumper reinforcement. 2. Remove bolts and nuts (1) fasteners for the bumper reinforcement. Tightening torque 160 Nm. 3. Remove...

Rear bumper trim panel
Withdrawal Except Avalanche/Escalade EXT 1. Remove the rear wheel arch extensions. 2. Remove the bolts (1) rear bumper trim panel. 3. Remove three bolts (2)...

Rear bumper reinforcement
Withdrawal 1. Remove the rear bumper trim panel. 2. Remove four bolts (1) bumper amplifier. Tightening torque 70 Nm. 3. Remove six bolts (2) bumper amplifier....

Radiator grill — removal and installation
Suburban, Tahoe 1. Remove the front bumper panel. 2. Loosen the screws (1) grille mountings. Tightening torque 9 Nm. 3. Pull the grid out of the clips (2). 4....

Radiator grill reinforcement support
Withdrawal 1. Remove the baffle and choke from the top of the radiator. 2. Remove headlights. 3. Turn away the top bolts of fastening of an overlay of a...

Radiator support — removal and installation
Withdrawal 1. Remove the front bumper trim panel. 2. Remove the grille booster support. 3. Remove the front bumper trim support upper bracket. 4. Remove the...

Front fender — removal and installation
Left 1. Remove headlights. 2. Remove the radiator support braces. 3. Remove the top rear fender bracket. Turn away bolts and remove an arm of fastening of a...

Front wheel arch liner
Withdrawal 1. Remove the front wheel. 2. Remove four bolts (1) fender mounts. Tightening torque 3 Nm. Left fender liner example 3. Remove 12 (on right) or 11...

Rear wheel arch liner
Withdrawal 1. Remove the rear wheel. 2. Remove seven bolts (2) fender mounts. Tightening torque 9 Nm. 3. Remove the three plastic clips (1). 4. If necessary,...

Windshield pillar molding
Withdrawal 1. Disable the passive safety system. 2. Remove auxiliary handle (passenger side only). 3. Remove the cover (1) screw access (2) molding...

B-pillar top molding
Withdrawal 1. Disable the passive safety system. 2. Remove the lower molding of the central pillar. 3. Remove cover (1) screw access (2) molding attachments....

B-pillar lower molding
Withdrawal 1. Remove an overlay of a threshold of a forward door. 2. Remove an overlay of a threshold of a back door. 3. Pull out the molding (1) from clamps...

Roof Panel Rear Molding (Avalanche/Escalade EXT)
Withdrawal 1. Remove rear glass. 2. Remove a molding of a back rack. 3. Pull out the molding (1) ceiling panel from clamps (2). Installation 4. Installation is...

Rear corner molding
Right side 1. Disable the passive safety system. 2. Remove a molding of an aperture of a back door. 3. Remove cover (1) screw access (2) corner molding fixings...

Cargo compartment door molding
Withdrawal 1. Pull out the molding (1) of seven clips (2) fixing the molding downwards. Installation 2. Installation is carried out in the reverse order.

Front pillar molding
Withdrawal 1. Remove the front door sill trim panel. 2. Pull out the molding (1) from clamps (2). Installation 3. Installation is carried out in the reverse...

Rear fender trim panel
Withdrawal 1. Disable the passive safety system. 2. Remove the third row seats. 3. Remove the cargo door opening molding. 4. Remove the rear corner molding. 5....

Rear floor trim panel (Avalanche/Escalade EXT)
Withdrawal 1. Remove a molding of a back rack. 2. Remove middle door hinges (between saloon and cargo compartment). 3. Pull out the trim panel (1) back of the...

C-pillar molding (Avalanche/Escalade EXT)
Withdrawal 1. Disable the passive safety system. 2. Remove the overlay panel of a threshold of a back lateral door. 3. Remove the access cover (1) to the...

C-pillar molding
Withdrawal Extended wheelbase 1. Disable the passive safety system. 2. Remove the overlay panel of a threshold of a back lateral door. 3. Remove the access...