Withdrawal
1. Lower the window glass.
2. Make sure the door lock release button (1) is in the unlocked position.
Standard wheelbase, typical example
3. Using a flathead screwdriver, pry out the holder of the lock release button, pull the button upwards.
4. Remove the cover (2) patch panel.
5. Remove the four screws (3) panel mounting.
6. Remove the cover (4) facets of the internal handle of opening of a door.
7. Remove three bolts (5) door panel fixings.
8. Pull back the trim panel (6) from the door frame.
9. Pull out the holder (7) lock cable.
10. Pull out the panel (6) from clamps (8), remove the panel.
Installation
11. Installation is carried out in the reverse order.