Safety system (SRS) of the car Chevrolet Tahoe 2 and 3
Precautions for operation and maintenance Mistakes made while servicing the airbag system may cause the system to deploy unintentionally during service activities, or the system may not deploy at the...
Disabling and connecting the passive safety system Before shutdown 1. Set the wheels in the straight ahead direction. 2. Turn off the ignition. 3. Remove the key from the ignition lock. 4. Remove the fuse "AIR...
Driver's airbag Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system "). 2. Turn the ignition key to position...
Front passenger airbag Withdrawal 1. Remove the instrument panel trim on the right side (see chapter " Body "). 2. Disable the passive safety system (see section " Disabling and...
Side airbag for driver and front passenger Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system (SRS) "). 2. Remove the front seat (see...
Front impact sensor Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system "). 2. (Some Models) Remove the engine...
Side impact sensor Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system "). 2. Remove the front door trim panel (see...
Passive safety system control unit Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system "). 2. Remove the driver's seat. 3. Remove...
Spiral Airbag wire Withdrawal 1. Disable the passive safety system (see section " Disabling and connecting the passive safety system "). 2. Remove casings of a steering column...
Seat position sensor (models since 2003) Withdrawal 1. Remove the driver's or front passenger's seat. 2. Disconnect the connector from the seat position sensor. 3. Drill out the sensor mounting rivets...
Passenger seat monitoring system (models since 2003) Withdrawal 1. Remove the upholstery and padding of the front passenger seat cushion. 2. Disconnect the connectors. 3. Turn away bolts of fastening of the block...
Front seat seat belt Withdrawal 1. Move the front seat as far forward as possible. 2. Remove an upholstery and stuffing of a back of a forward seat. 3. To access the seat belt...
Front seat belt buckle Withdrawal 1. Loosen the nut (1) securing the front seat belt buckle. Disconnect the seat belt buckle connector (2). Tightening torque 53 Nm. 1 - nut, 2 -...
Center seat belt, front seat Withdrawal 1. Turn away a bolt of fastening of the central seat belt and remove a belt. Tightening torque 53 Nm. 2. Turn away a bolt and remove the lock of the...
Central seat belt of the rear seat Withdrawal 1. Remove the guide (1) central seat belt. 2. Remove the rear seat armrest. 3. Disconnect the latch located behind the armrest. 4. Turn away a nut...
Rear center seat belt buckle Withdrawal 1. Fold down the rear seat. 2. Remove the two bolts securing the seat belt buckle to the rear of the seat base. Tightening torque 3 Nm. 3. Turn away...
Rear seat belt buckle Withdrawal 1. Remove an upholstery and stuffing of a pillow of a back seat. 2. Remove the bolt (13) lock fixings (14) seat belt to the seat base. Tightening...
Second row rear seat belt with pretensioner Withdrawal Chevrolet Tahoe 1. Remove front and rear side door sill trims (see chapter " Body "). 2. Turn away the lower bolt of fastening of a pretensioner to...
Third row rear seat belt with pretensioner Withdrawal Seat with cushions 60/40 1. Remove the second row rear seat. 2. Turn the center lock until the seatback is fully folded out. 3. Remove the cover...