Upper right and left sensors
1. Remove the top finishing of the panel of devices. See chapter "Body".
2. Disconnect the electrical connector (1) upper right temperature sensor (2).
Models up to 2005 | 
Models since 2005 |
3. Remove the upper right temperature sensor (1) from the central duct.
4. Remove the upper left temperature sensor (2) from the central duct (1).
5. Disconnect the connector (3) upper left temperature sensor (2).
6. Installation is carried out in the reverse order.
Lower right and left sensors
1. Remove the lower furnish of the panel of devices.
2. (Models up to 2007) Remove the right bottom air duct.
3. (Models up to 2007) Remove the center console.
4. Disconnect the lower right temperature sensor connector (1).
5. Remove the lower right temperature sensor.
6. (Models since 2007) Remove the knee brace.
7. Disconnect the lower left temperature sensor connector (1).
8. Remove the lower left temperature sensor (1) from the air conditioning unit (2).
9. Installation is carried out in the reverse order.
Additional temperature sensors
1. Remove the side trim of the luggage compartment on the right side.
2. Remove finishing of a back rack from the right side.
3. Disconnect the optional upper temperature sensor connector (11).
4. Remove the optional upper temperature sensor (11) from the central duct.
5. Disconnect the optional lower temperature sensor connector (10).
6. Remove optional lower temperature sensor (10) from the central duct.
7. Installation is carried out in the reverse order.