Withdrawal
1. Lower tailgate.
2. Turn away bolts of the handle of the lock. Tightening torque 25 Nm.
3. Raise tailgate.
4. Remove the handle cover by prying it up with a screwdriver at the top.
5. Disconnect the lock rods (1).
6. Release tailgate 45°.
7. Remove the restrictive cables from the bolts of the side boards, lower the board completely.
8. Turn away bolts of fastening of the lock. Tightening torque 25 Nm.
9. Disconnect the handle rod from the lock.
10. Remove the lock.
Installation
11. Installation is carried out in the reverse order.