Withdrawal
1. Remove the door trim panel.
2. Remove the power window mechanism.
3. Remove the internal door handle.
4. Remove the outer door handle.
5. Remove the door lock drive.
6. Remove the outer glass seal.
7. Disconnect the door wire harness.
8. Turn away a bolt of fastening of the limiter of opening of a door to a body rack. Tightening torque 25 Nm.
9. Turn away bolts of fastening of the top and bottom loops of a door. Tightening torque 25 Nm.
10. Together, lift the door off the hinge pins, remove the door.
Installation
11. Installation is carried out in the reverse order.