Withdrawal
1. Remove the door trim panel.
2. Turn away bolts of fastening of the lock to a door.
3. Remove the lock from the door.
4. Disconnect the lock opening cable from the lock.
5. Remove the bolts securing the lock.
6. Remove the lock.
Installation
1. Connect the lock release cable to the lock.
2. Install a lock on the door.
3. Hand-tighten the two lower mounting bolts.
- A) Close the door to reset the lock. Tighten the bolts. Tightening torque 9 Nm.
- b) Open the door.
- V) Install and tighten the top bolt. Tightening torque 9 Nm.
4. Install the door trim panel.