Withdrawal
1. Remove an overlay of the internal handle of a door.
2. Remove the top door trim panel extension.
3. Using a flathead screwdriver, carefully remove the manual door lock lever from the trim panel.
4. Remove the retainer (3) front edge of the door trim panel.
5. Remove cover (5) screws (6) securing the rear edge of the trim panel.
6. Loosen the screws (2), (4) And (6) trim panel fixings. Tightening torque 2 Nm.
7. Gently slide the trim panel (1) up until it releases from the locks on the door.
8. Disconnect wiring connectors.
Installation
9. Installation is carried out in the reverse order.