Withdrawal
1. Remove the door trim panel.
2. Remove the door seal.
3. Disconnect the lock rod from the handle.
4. Disconnect draft from the cylinder of the lock of a door.
5. Secure the outside handle to the door with adhesive tape to prevent it from falling off after the nuts are loosened.
6. Remove the rubber plug from the outer nut access hole.
7. Remove the retaining clip and remove the lock cylinder from the outer handle housing.
8. Turn away nuts of fastening. Tightening torque 9 Nm.
9. Remove the handle.
Installation
10. Installation is carried out in the reverse order.