Withdrawal
1. Raise the glass. If the power window motor does not work, remove the glass to gain access to the motor mounting screws.
2. Remove the door trim panel.
3. Remove the door seal.
4. Remove the door speaker.
5. Fix the glass.
6. Disconnect the power window motor wiring connector.
7. Remove three bolts (1) motor mounts. Tightening torque 5 Nm.
Front door | 
Rear side door |
8. Rock the motor to separate it from the flexible shaft housing. Note the orientation of the motor.
Attention: do not let the flexible shaft of the electric motor come out of the housing, the shaft may come off the coil and the electric motor will have to be replaced.
9. Remove the power window motor.
Installation
10. Installation is carried out in the reverse order.