Withdrawal
Avalanche
1. Turn off the headlights.
2. Remove the cargo compartment cover.
3. Loosen the screws (1) And (2) fixings of the central bridge. Tightening torque 7 Nm.
4. Disconnect the bridge wiring connector.
5. Remove the bridge from the vehicle.
6. Remove the upper brake light from the bridge.
7. Installation is carried out in the reverse order.
Escalade EXT
1. Turn off the headlights.
2. Remove the cargo compartment cover.
3. Loosen the screws (1) fixings of the central bridge. Tightening torque 7 Nm.
4. Rotate the bridge down until it releases from the latches.
5. Disconnect the connector (2) bridge wiring.
6. Remove the bridge from the vehicle.
7. Remove the upper brake light from the bridge.
Installation
8. Installation is carried out in the reverse order.