Connection tightening torques (Nm) Bolts of fastening of the case of the back bearing to transmission (RPO M20): Upper - 25 Lower - 36 Nut for fastening the universal joint flange to the gearbox...
General information about the mechanical box The cars in question are equipped with either four- or five-speed manual transmissions, or 3- or 4-speed automatic transmissions. Most manual transmissions are...
Gear change lever — removal and installation 1. On all-wheel drive models, remove the cover from the transfer case lever. 2. Loosen the screws and slide the lever cover together with the cover. 3. On a...
Gearbox — removal and installation 1. Disconnect the battery from the ground. 2. Remove the shift lever. 3. Raise the vehicle and place it on stands. 4. Drain the transmission oil. 5. Remove the...
Manual transmission — disassembly To repair the gearbox, a certain qualification and special tools are required (pullers, micrometer heads and fixtures, shims to compensate for axial play of...
Oil seal — replacement Attention! The procedure for replacing the oil seal is the same for manual transmission and automatic transmission. 1. The cause of oil leakage is usually the...