2. Drain the liquid from the cooling system, disconnect all hoses from the radiator (see photo).
3. On models with automatic transmission, disconnect the transmission fluid cooler tubes.
4. On models with an oil cooler, disconnect the oil cooler tubes from the radiator.
5. Turn away bolts and remove the top part of a casing of the fan (see photo).
6. Remove radiator brackets (if provided) and remove the radiator from the engine compartment (see photo).
7. Before installing the radiator, replace any damaged hoses and hose clamps.
8. The radiator is installed in the reverse order. Make sure that the radiator is installed in place, the lower radiator clamps should go into their mating sockets.
9. When finished, check the engine oil and automatic transmission fluid levels.