Stabilizer bar — removal and installation

1. Raise the vehicle and place it on stands.

2. Turn away nuts of bolts of fastening of draft of the stabilizer and remove bolts of fastening of draft of the stabilizer (see photo).

Attention! Keep parts and fasteners removed from the left and right parts of the stabilizer separately.

3. Turn away a bolt of fastening of an arm of a bar of the stabilizer (see photo).



4. Remove the stabilizer bar.

5. Remove the rubber bushings.

6. Check the condition of all parts for wear and damage.

7. When installing the rubber bushings on the stabilizer bar, orient them so that the slots on the bushings face the front of the vehicle.

8. Installation is carried out in the reverse order.