Car driveline Chevrolet Niva 1

Driveline device
The device of shafts of cardan transfer is shown in fig. 3-41, 3-42. Pic. 3-41. Cardan gear assembly: 1 - front propeller shaft; 2 - intermediate cardan shaft;...

Removal and installation of cardan
Put the car on a lift (above the pit), allowing the front and rear wheels to turn freely on one or both sides of the vehicle. Park the vehicle securely,...

Checking the technical condition without disassembly
After cleaning and washing the cardan shafts, check the cardan joints of the front and rear shafts for ease and smoothness of turning the forks and for the...

Dismantling the driveline
intermediate shaft. Disconnect the coupling with clamp 1 from the flange 3 (pic. 3-43), noting the number and location of balancing washers 16, bolts 2, nuts...

Checking the technical condition
Eccentricity check. Install front (rear) cardan shaft in the centers and, turning it, check the runout of the pipe, which should not exceed: 0.5 mm at a...

Cardan assembly
Assemble cardan shafts in the reverse order of disassembly, taking into account the following: apply evenly 3-4 g of Fiol-1 or Fiol-2U lubricant on splined...