Pic. 2-61. Installing the accessory drive belt:
1 - crankshaft pulley;
2 - water pump pulley;
3 - tension roller;
4 - tension roller bracket;
5 - bolt;
6 - generator pulley;
7 - belt;
8 - nut;
9 - supporting roller;
10 - power steering pump pulley.
The belt tension is adjusted by turning the bolt 5 (pic. 2-61) loose nuts 8. Rotate the crankshaft two turns clockwise and check the belt tension.
The belt must not be over-tensioned so as not to cause an increase in loads on the generator bearings.