Checking the battery electrolyte level

The electrolyte level in all battery cells must be between the lines marked «MIN» And «MAX», applied to the translucent battery case. Do not operate a battery with an electrolyte level below the line marked «MIN».

If marks «MIN» And «MAX» battery case, the electrolyte level should be 10-15 mm above the top edge of the separators.

During operation of the battery, the electrolyte level gradually decreases, as the water that is part of it evaporates. To restore the electrolyte level, add only distilled water.

If it is determined that sloshing is the cause of the low level, then add electrolyte of the same density as that left in the battery cell.

If the level is above normal, then select the excess electrolyte with a rubber bulb with an ebonite tip.