We carry out work on the left lamp, on the right lamp we perform operations in the same way.
Click on two pins..
... and remove the trunk upholstery cover.
By turning counterclockwise, we take out the cartridge with the lamp of the brake signal and side light from the lamp housing.
Clicking on the lamp, turn it counterclockwise..
... and remove the lamp from the cartridge (for clarity, shown on the removed lamp).
The combined brake and side light lamp has two protrusions located at different levels.
When installing a new P21 / 5W lamp, its protrusions must fit into the corresponding grooves of the socket.
The rest of the lamps are replaced in the same way.
If it is necessary to remove the rear light assembly with lamps, by pressing the latches, remove the trunk upholstery cover.
After that…
... by pressing the block lock, disconnect the block of wires from the lamp connector.
Using the "8" head, unscrew the four nuts securing the lantern and remove the lantern.
Remove the rubber gasket from the headlight.
We replace the torn or lost elasticity with a new one.
Install the rear light in reverse order.