Removing the front door trim (see Removal of an upholstery of a forward door).
Using a Phillips screwdriver, unscrew the two screws securing the switch block bracket...... and remove the bracket.
Remove the protective film from the inner door panel.
Having connected the power window control unit, set the glass to the upper position.
With a "10" head, we unscrew the two bolts securing the glass guide..
... and take it out through the technological hole in the inner panel of the door.
Set the glass to the bottom position.
Using a Phillips screwdriver, unscrew the two screws securing the glass caps to the slider..
... and turning the glass with the front down, take it out.
At the bottom of the glass there are two holes for installing plastic caps
Install the front door glass in reverse order.