Operations are shown on the fender liner and mudguard of the left wheel.
We remove the fender liner and mudguard of the right front wheel in the same way.
For the convenience of the work, we remove the wheels.
Using a Phillips screwdriver, unscrew the two screws securing the mudguard to the wing..
... and a self-tapping screw for the lower attachment of the mudguard to the threshold.
We remove the splash guard.
Using a Phillips screwdriver, unscrew the three screws securing the front part of the fender liner to the front bumper.
The fender liner is attached with four "A" type caps and one "B" type cap.
Types of pistons "A" and "B" for fastening the fender liner To remove the piston of type "A", it is necessary to push the pin locking it with a screwdriver or a round rod, and to remove the piston of type "B", it must be unscrewed from the stud.
Picking up pins..
... and remove the fender liner from the wheel arch.
Install the fender liner in reverse order.