Repair of car body elements Chevrolet Lanos 1

Description of body structure
Removable body parts: 1 - front bumper; 2 - hood with radiator lining; 3 - front wing; 4 — an external rear-view mirror; 5 - front door; 6 - back door; 7 -...

Removing the mudguards
We carry out the work if it is necessary to access the drive belts of auxiliary units and the timing of the engine, remove the bumper or if the mudguards are...

Removing mudguards and front fenders
We remove the fenders and mudguards for replacement and anti-corrosion treatment of the body. Operations are shown on the fender liner and mudguard of the left...

Removing the hood lock
We carry out work to replace or adjust the hood lock, replace the lock drive cable. Removing the left front fender (see Removing mudguards and front fenders )...

Removing the front bumper
We carry out work during the repair and replacement of the front bumper, energy-absorbing bumper beam. Removing the bumper cover (see Removing the mudguards )....

Removing the rear bumper
We carry out work during the repair and replacement of the rear bumper, beams and side energy-absorbing bumper elements. Using a Phillips screwdriver, unscrew...

Removing the outside rear-view mirror
We carry out work during the repair or replacement of the mirror. Operations are shown on the left mirror. The right mirror is removed in the same way. Hand...

Removal of an upholstery of a forward door
We carry out the work when replacing the power window, glass, internal door lock, cylinder lock mechanism, external and internal door handles. Operation is...

Removing the front door glass
We are working on glass replacement. Removing the front door trim (see Removal of an upholstery of a forward door ). Using a Phillips screwdriver, unscrew the...

Removing the power window mechanism of the front door
We are working to replace the power window mechanism. Operation is shown on the driver's door. The power window mechanism of the right front door is removed in...

Removing the lock, cylinder mechanism of the lock, outer and inner handles of the front door
We carry out work when replacing the lock, its cylinder mechanism, external and internal door handles. Removing the front door trim (see Removal of an...

Removal of an upholstery of a back door
We carry out the work when replacing the power window, glass, door lock, outer and inner door handles. Pry off the plastic cover on the back door.. ... remove...

Removing the rear door glass
We are working on replacing the door glass. Removing the door trim (see Removal of an upholstery of a back door ). Using a Phillips screwdriver, unscrew the...

Removing the power window mechanism of the rear door
We are working to replace the power window mechanism. Removing the door trim (see Removal of an upholstery of a back door ). We turn off the screws securing...

Removing the lock, inner and outer rear door handles
We carry out work when replacing the lock, outer and inner door handles. Removing the door trim (see Removal of an upholstery of a back door ) and glass (see...

Removing the trunk lid lock
We carry out work when replacing the lock, the need to lubricate the lock and its drive. Disconnect the wire tip from the lock limit switch. Turning the latch,...

Removing the lining of the floor tunnel
We carry out work when removing the cigarette lighter, adjusting the parking brake and removing the parking brake lever. For convenience, we move the front...

Removing the instrument panel
We carry out work to replace the instrument panel, panel wiring harness and elements of the heating, ventilation and air conditioning system. Disconnect the...