Disconnect the wire terminal from the "negative" terminal of the battery. Remove the accessory drive belt (see Accessory drive belt replacement).
Remove the air supply hose from the air filter to the throttle assembly (see Removing the throttle assembly).
Using the "12" wrench, unscrew the nut that secures the tube bracket..
... and remove the power steering tube bracket from the generator mounting stud.
Using the "12" key, unscrew the generator mounting stud.
Remove the protective cap from the generator output (intake manifold removed for clarity).
Using the "12" wrench, unscrew the nut securing the wire tip to the generator output.
Remove the wire end from the generator output.
Use a screwdriver to pry out the retainer..
... and disconnect the block of wires from the generator connector.
Using the "14" head, unscrew the three bolts securing the generator bracket..
... and remove the generator with the bracket.
With the "12" key, we unscrew the nut of the lower mounting of the generator, holding the bolt from turning with the second "12" key.
Remove the lower mounting bolt of the generator..
... and remove the generator bracket.
Install the generator in reverse order.