Instrument cluster: 1 - control lamps; 2 - instrument illumination lamps.
Disconnect the wire terminal from the "negative" terminal of the battery.
Remove lower steering column cover (see Removing the Paddles, Coiled Cable Drum and Switch Connector).
Using a Phillips screwdriver, unscrew the two screws securing the instrument cluster trim (steering column removed for clarity).
Squeezing the lining with your hand, we remove the lining latches from engagement with the instrument panel..
... and remove the lining of the instrument cluster with the upper casing of the steering column.
Using a Phillips screwdriver, unscrew the screw of the upper fastening of the combination
and two bottom screws.
We take out the combination from the instrument panel and disconnect the two blocks of wires from the instrument cluster.
Using tweezers, turn the lamp counterclockwise and remove it from the instrument cluster.
If a light filter is installed on the lamp, we rearrange it to a new lamp. Install the new bulb in reverse order. Replace the rest of the bulbs in the same way.
Install the instrument cluster in reverse order.