Removal of an upholstery of a back door

We carry out the work when replacing the power window, glass, door lock, outer and inner door handles.



Overcoming the resistance of the latches, remove the plastic lining of the rear door.



Using a Phillips screwdriver, unscrew the self-tapping screw securing the door armrest lining.



Raise the cladding.




After disconnecting the wiring harness block, remove the lining.



We pry off the decorative frame of the inner door handle.



We remove the frame, overcoming the resistance of the clamps.



Using a Phillips screwdriver, unscrew the two screws securing the upholstery.




We separate the door upholstery from the inner panel, overcoming the resistance of five caps.



The location of the caps on the door upholstery.



Using a Phillips screwdriver, unscrew the two screws securing the armrest trim bracket.



We remove the bracket.




Remove the moisture-proof film from the inner door panel.



View of the rear door with the upholstery removed and the moisture-proof film

Install upholstery in reverse order.