Operations are shown on the left mirror. The right mirror is removed in the same way.
Having protected the door upholstery with thin cardboard, pry off the exterior mirror trim with two screwdrivers
and take her away.
By pressing the latch, disconnect the wire block from the mirror control unit.
By pressing the latch, disconnect the block of wires from the outside mirror.
Using a Phillips screwdriver or a "10" head, unscrew the three bolts securing the exterior mirror..
...and take it off.
We press the latches
and take out the mirror control unit.
To remove the mirror element, carefully pry off its latches
and remove the mirror element.
Disconnect the heating wire connectors.
We assemble and install the outside rear-view mirror in reverse order.