Before starting work, it is necessary to discharge the coding system. The air conditioning system must be discharged or charged with refrigerant at specialized air conditioning services.
Disconnect the wire terminal from the "negative" terminal of the battery.
Remove the accessory drive belt (see Accessory drive belt replacement).
Turn off the nut with the "14" head
and disconnect the tube and hose from the compressor.
Remove the sealing washer from the hose end.
We take out the sealing washer of the tube from the compressor hole.
Disconnect the wiring harness connector from the compressor solenoid clutch connector.
With the "12" head, unscrew the four compressor mounting bolts
and remove the compressor.
Install the compressor in reverse order. At the same time, we replace the sealing washers of the tube and hose with new ones.
We charge the air conditioning system at a specialized station.