1. Disconnect the wire from the terminal «minus» battery.
2. Remove the electric fan assembly with the casing (see «Removal and installation of the electric fan of the radiator of the engine cooling system, complete with casing»).
3. Turn out three screws of fastening of the electrofan to a casing.
4. Remove the electric fan harness from the housing slots.
5. Disconnect additional resistance from a casing of the electrofan.
6. Disconnect the motor/fan assembly by threading the wire harness with additional resistance through the hole in the shroud.
Note: The electric motor is assembled with the impeller, therefore it is not subject to disassembly and repair.
7. Install the engine cooling fan motor in the reverse order of removal.